Mac PPPoE

Step 1: Click the Wifi symbol in the top right of your menu bar and select "Open Network Preferences"


Step 2: Under the Network screen, select Ethernet. In the Configure IPV4 box, select "Create PPPoE Service".


PPPoE-(29).jpg


Step 3: Type the Service Name (This is optional) and click Done.


PPPoE-(30).jpg

Step 4: Type the username and the password which are from your ISP, then click "Apply and Connect".  If you know what it is, enter it now. If you are unsure you can call our tech support at 1-800-461-6379 or submit a ticket at www.netspectrum.ca/support and we will be able to provide the credentials to you. 


PPPoE-(31).jpg

If it is successful, you will see an IP address as shown below:


PPPoE-(32).jpg